Speed Queen SF7000WE Installation Manual download pdf (Page 26)

Standard 120 Volt, 60 Hertz 3-Wire Effective Earth/

Ground Circuit

DRY2022N_SVG

1. L1

2. Earth/Ground

3. Neutral Side

4. Round Earth/Ground Prong

5. Neutral

6. 0 V.A.C.

7. 120 ± 12 V.A.C.

8. 120 ± 12 V.A.C.

Figure 27

WARNING

To reduce the risk of an electric shock or fire, DO

NOT use an extension cord or an adapter to connect

the washer to the electric power source.

W082

Earth/Ground Instructions

This appliance must be properly connected to protective earth/

ground. In the event of malfunction or breakdown, the earth/

ground will reduce the risk of electric shock by providing a path

of least resistance for electric current.

The appliance is equipped with a cord having an equipment earth/

ground conductor and a three-prong earth/ground plug. The plug

must be plugged into an appropriate outlet that is properly instal-

led and connected to a protective earth/ground in accordance with

all local codes and ordinances.

WARNING

Improper connection of the equipment earth/ground

conductor can result in a risk of electric shock.

Check with a qualified electrician or service person if

you are in doubt as to whether the unit is properly

connected to a protective earth/ground.

W893

• DO NOT modify the plug provided with the unit – if it will

not fit the outlet, have a proper outlet installed by a qualified

electrician.

• If the laundry room’s electrical supply does not meet the

above specifications and/or if you are not sure the laundry

room has an effective earth/ground, have a qualified electri-

cian or your local electrical utility company check it and cor-

rect any problems.

• Do not operate other appliances on the same circuit when this

appliance is operating.

WARNING

This unit is equipped with a three-prong (earth/

ground) plug for your protection against shock haz-

ard and should be plugged directly into a protective

earth/ ground three-prong receptacle. Do not cut or

remove the earth/ground prong from this plug.

W823

Check Installation

1. Refer to Installer Checklist on the back cover of this manual

and make sure that unit is installed correctly.

2. Run washer with a test load to make sure it is operating prop-

erly and properly leveled.

a. Put about six pounds of laundry (four bath towels and

three jeans) into washer.

b. Close door.

c. Select Spin cycle and press Start.

d. When washer spins at high speed, verify that it is stable.

e. If it is not, after cycle is complete, refer to Position and

Level the Washer to readjust leveling legs.

Check Heat Source

Electric Dryers

1. Close the loading door and start the dryer in a heat setting (re-

fer to the operation instructions).

2. After the dryer has operated for three minutes, the exhaust air

or exhaust pipe should be warm.

Installation

DO NOT COPY or TRANSMIT

26 Part No. 804671ENR4

1 2 ... 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments

Speed Queen SF7000WE Installation Manual Page 26

Comments to this Manuals

Related products and manuals for Electric laundry dryers Speed Queen SF7000WE