Speed Queen SF7000WE Installation Manual download pdf (Page 16)

Heating elements are available for field installation in dryers

which are to be connected to electrical service of different volt-

age than that listed on serial plate, such as 208 Volt.

NOTE: Branch circuit wire size requirements to laundry

room outlet are shown in table below.

Wire Length Wire

Less than 15 ft. [4.5 m] Listed No. 10 AWG Copper

wire only

Longer than 15 ft. [4.5 m] Listed No. 8 AWG Copper

wire only

Table 3

The power cord connection between wall receptacle and dryer

terminal block IS NOT supplied with dryer. Type of power cord

and gauge of wire must conform to local codes.

Connecting Power Cord with Three-Wire Plug

NOTE: Four-wire cord is required for new branch-cir-

cuit installations, mobile homes or where codes do not

permit grounding through neutral.

NOTE: The power cord is NOT supplied with the elec-

tric dryer. Type of power cord and gauge of wire must

conform to local codes and instructions. The method

of wiring the dryer is optional and subject to local code

requirements.

NOTE: Connect the dryer to the power supply with the

MAXIMUM RATED VOLTAGE listed on the serial plate.

NOTE: Use COPPER WIRE only.

Shorter than 15 ft. (4.5 m) – use 10 AWG

Longer than 15 ft. (4.5 m) – use 8 AWG

Installation

DO NOT COPY or TRANSMIT

16 Part No. 804671ENR4

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

No comments

Speed Queen SF7000WE Installation Manual Page 16