Speed Queen SF7000WE User Manual Page 27

  • Download
  • Add to my manuals
  • Print
  • Page
    / 32
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 26
Troubleshooting
Try these troubleshooting tips before making a service call.
They may save you time and money.
Washer Symptom Possible/Cause Solution
Won't Fill Make sure power cord is plugged all the way into the elec-
trical outlet.
Make sure hot and cold water faucets are turned on.
Make sure that the fill hoses are not kinked or twisted.
Press Start/Pause button to start washer.
Make sure that the controls are properly set.
Make sure that the loading door is closed tightly.
Check the laundry room fuse or circuit breaker.
Clean the screens in the water mixing valve and the filter
screens located at the faucet end of the fill hoses. (Owner
is responsible for service calls regarding cleaning of the
screens.)
Won't Start Make sure that the loading door is closed tightly.
Press Start/Pause button to start washer.
Make sure power cord is plugged all the way into the elec-
trical outlet.
Make sure that the controls are properly set.
Check the laundry room fuse or circuit breaker.
Make sure door latch is properly adjusted relative to door
lock.
You will not be able to press the Start/ Pause button to
start a cycle until five seconds after turning on the washer.
A status light will flash during this warm-up period.
Won't Spin/Tumble Make sure that the loading door is closed tightly.
Press Start/Pause button to start washer.
Make sure power cord is plugged all the way into the elec-
trical outlet.
Make sure that the controls are properly set.
Check the laundry room fuse or circuit breaker.
Broken drive belt. Call the service person.
Foreign object trap in pump may be clogged. Clean the
trap. Refer to Maintenance section.
Stops/Pauses During Cycle Pauses are part of the washer’s normal operation.
Check the laundry room fuse or circuit breaker.
Wash load may be unbalanced. Washer will stop and then
restart spin automatically. If the washer is severely unbal-
anced, press the Start/Pause button and redistribute the
load.
Table continues...
Troubleshooting
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
27 Part No. 806970EN
Page view 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments