Speed Queen AFNE9BSP113TN01 User's Guide download pdf (Page 20)

FLW2296N_SVG

1. Shipping Brace

Figure 2

FLW2297N_SVG

1. Shipping Bolt Assembly

Figure 3

Refer to the Installation instructions for proper procedures when-

ever the washer is moved.

Cleaning Foreign Object Trap

The washer’s pump has a trap that may collect foreign objects. The

trap may need to be cleaned if water is draining slower than usual.

To clean:

1. Disconnect washer from electrical supply.

2. Remove two screws at bottom of the front access panel.

3. Rotate bottom of panel out and remove panel.

NOTE: The pump may have some water in it. Use a

rag or a container to catch water. If the wash drum is

full of water, use a wet/dry shop vacuum to catch the

water.

4. With rag or vacuum ready, unscrew the cap on the left side of

the pump and remove trap.

5. Clean the debris from the trap.

6. Reinstall the trap and access panel.

7. Reconnect washer to electrical supply.

Preventative Maintenance

Follow these guidelines to ensure the washer operates properly.

Call for service if you observe any of the following: water of any

amount on the floor, an increase in operating noise or water re-

maining in the wash basket after a cycle.

Frequency

Maintenance Procedure

Monthly 1. Check all hoses and the

drain for leaks.

2. Check the door lock for

proper operation.

3. Clean the dispenser drawer.

Refer to Using Your Dis-

penser Drawer.

4. Check to make sure the

washer is level.

Every six months 1. Clean the filter screens in

the fill hoses.

2. Clean the door gasket with

a bleach and water solution.

Every five years 1. Have a qualified service

technician conduct general

preventative maintenance

on the washer to ensure it

operates properly.

2. Replace the fill hoses.

Maintenance

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments

Speed Queen AFNE9BSP113TN01 User's Guide Page 20

Comments to this Manuals

Related products and manuals for Washing machines Speed Queen AFNE9BSP113TN01